JBLCar | the ultimate in car sound
C608S GTi Classic
FEATURES
160mm (6.5”) 2-Way Component Speaker System
- Power Handling: 150W RMS / 600W Peak
- Frequency Response (±3dB): 50Hz – 21kHz
- Sensitivity (2.83v, 1m): 89dB
- Impedance: 4 ohms
- Crossover Frequency: 3.5kHz, 24dB/oct
- Mounting Depth: Woofer – 2-11/16”, Tweeter – 1-1/8”
DESCRIPTION
The woofer cone developed for the C608GTi MKII is anodized aluminium. This material moves the first-modal cone-body breakup to a high frequency outside the operating band, significantly reducing distortion and maximizing midrange clarity.
An optimized nitrobutylene (NBR) low-loss surround material is used to damp cone breakup modes.
A 2" aluminium edge-wound voice coil is used. Using this ribbon-shaped aluminium wire allows us to precisely specify the number of windings in the magnetic gap optimizing motor force for high efficiency and low distortion.
The tweeter featured in the C608GTi MKII system uses a pure titanium dome suspended by a rubber surround to optimize output and reduce distortions that travel along the tweeter's dome.
The C608GTi MKII utilizes an outboard crossover with a 3500Hz fourth-order Linkwitz-Riley acoustic alignment. Air-core inductors are used to reduce magnetic saturation under high-power conditions and polypropylene capacitors ensure near ideal characteristics with low equivalent series resistance (ESR). The crossover also features impedance compensation and a tweeter protection circuit. Tweeter level may be adjusted for flat response +2dB or -2dB.
The C608GTi MKII midrange/woofer cone also features Plus One (patent pending) technology, which provides up to 30% more cone area than competing speakers of the same size. Speaker with Plus One deliver higher efficiency and more bass output.
The Tweeter in the C608GTi MKII component system features the I-Mount (patent no. 5,859,9170) tweeter-mounting system. This system facilitates easy and versatile tweeter installation (surface, flush, or flush angled).
Works best with...