HARMAN/KARDON | home theatre without comprimise
AVR 645 - AV Receiver
Audio Video Receivers
FEATURES
7 x 75W, 7.1-Channel A/V Receiver
- Continuous Average Power (FTC) – Stereo Mode: 90W / Channel into 8 Ohms at 20Hz – 20kHz, <0.07% THD, both channels driven
- Continuous Average Power (FTC) – Seven-Channel Surround Mode: 75W / Channel into 8 Ohms at 20Hz – 20kHz, <0.07% THD, all channels driven
- High instantaneous current capability (HCC): ±50 amps
Tuner
- Usable Sensitivity: IHF 1.3μV/13.2dBf;
- THD at 1kHz with 100% modulation: (Mono) 0.2%, (Stereo) 0.3%
- FM adjacent channel selectivity: ±400kHz, 70dB
- Ultimate (Maximum) S/N Ratio (measured at 1mV RF input level): (Mono) 70dB, (Stereo) 68dB
General
- 75W x 7 into 8 Ohms, 20Hz – 20kHz at <0.07% THD with all channels driven simultaneously
- High-current (±50 amps), Ultrawide-Bandwidth (10Hz – 100kHz) amplifier design effortlessly powers the most dynamic digital sources
- Dolby Digital and Dolby Digital EX extended surround decoding using Advanced TI™ DA610 (250Mhz) 32-bit DSP processor
- Full Suite of DTS® Modes, including DTS-ES® 6.1 discrete and matrix and Neo:6® and DTS 96/24
- Dimensions (H x W x D): 165mm x 440mm x 435mm
- Weight: 18.6kg
DESCRIPTION
Versatility at its best! The AVR 645 not only switches two HDMI 1.1 sources; it is able to decode Dolby® Digital, DTS® and PCM audio streams from the HDMI inputs. Add USB audio and iPod connectivity to our EzsSet/EQ™ system and high-current amplifier, and the AVR 645 performs with ease. Equally impressive on the video side is format conversion so that all analog video inputs may be viewed via component outputs, and A/V Sync Delay, which reconnects the timing of sound and image. There is no better combination of sound and image anywhere.