BW | listen and you'll see

703

Floor Standing Speaker

FEATURES

• Drive Units:  2 x ø165mm (6.5”) Paper/Kevlar® cone bass
• Drive Units:  1 x ø160mm (6”) woven Kevlar® cone FST™ midrange
• Drive Units:  1 x ø25mm (1”) alloy dome high-frequency
• Frequency Range:  -6dB at 30Hz, 50kHz
• Frequency Response:  38Hz – 25kHz ±3dB on reference axis
• Diversion:  Within 2dB of reference response (Horizontal – over 40⁰ arc, Vertical – over 10⁰ arc)
• Sensitivity:  90dB spl (2.83V, 1m)
• Harmonic Distortion:  2^nd and 3^rd harmonics (90dB, 1m) <1% 80Hz – 20kHz, <0.5% 150Hz – 20kHz
• Nominal Impedance:  8 Ohms (minimum 3)
• Crossover Frequency:  350Hz, 4kHz
• Recommended Amplifier Power:  50W – 200W into 8 Ohms on unclipped programme
• Maximum Recommended Cable Impedance:  0.1 Ohms
• Dimensions (H x W x D):  1007mm x 232mm x 357mm
• Weight:  27kg

DESCRIPTION

The 703 is a full 3-way design. Twin bass drivers, their stiff paper/Kevlar® cones further strengthened by our unique girder-like mushroom construction, work in parallel in a Flowport-tuned cavity to handle all the bass frequencies.

Freed from the need to produce any bass signals, the dedicated FST midrange driver operates in its own isolated cavity within the cabinet. The combination of its woven Kevlar® cone and mechanically matched outer suspension enables this driver to portray the finest nuances in the signal, giving instruments their correct timbral character and positioning them accurately on the sound stage.

The tube-loaded tweeter is freely mounted on top of the cabinet to give a sense of airiness and to reduce the listeners' awareness of the speakers as discrete sound sources.

• Large Font
• Small Font
• Print
• Email